Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Polybest 66 PD GF25  - PA66-GF25 - Polyma Kunststoff GmbH & Co.KG

Material Data Center offers the following functions for Polybest 66 PD GF25 :
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polybest 66 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.005 mm/mm ASTM D 955
機械的特性乾燥/調湿単位テスト基準
ISO データ
アイゾット衝撃試験, +23°C 45 / - kJ/m² ISO 180/1U
ASTM数据
破壊応力 120 / 80 MPa ASTM D 638
破断伸び 3.5 / 4 % ASTM D 638
曲げ弾性率 7500 / 5000 MPa ASTM D 790
ロックウェル硬度 R 120 / R 115 - ASTM D 785
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 1.6 mm -
DTUL @ 66 psi 250 °C ASTM D 648
DTUL @ 264 psi 240 °C ASTM D 648
溶融温度 260 °C ASTM D 3418
電気的特性.乾燥/調湿単位テスト基準
ASTM数据
表面抵抗率 * / 1E11 Ohm ASTM D 257
体積抵抗率 1E15 / 1E11 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率, 24hr 0.8 % ASTM D 570
密度 1380 kg/m³ ASTM D 792
特殊な特性
納入形状.
ナチュラルカラー
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.